Universal Side Cargo Loading System

Our Automatic Side Cargo Loading System is designed to load anything up to a maximum of 200lbs and up to a width of 65” on top of one’s vehicle. It is exceptionally helpful when loading Cargo onto high vehicles like Motor homes, Trailers, Fifth Wheels and Campers, where it is a two person job. Some popular applications are to load Kayak’s, Canoe’s, Pontoon Boats, Inflatable’s, Ladders, etc. (the applications are endless). This Loader is very versatile, as it is adjustable to be used to load many different products.

Constructed from aircraft grade aluminum the Loader is light weight, very strong and rust free. All moving parts of the Loader are maintenance free and require no lubrication.

How it Works

Two clips are attached to an aluminum tube (equalizing bar) are connected to a pair of eyelets (or loading straps) which are fastened to the side of the object or cage. When the loading button is pressed on the wireless remote the winch is energized lifting the object vertically until the equalizing bar comes in contact with the loading arms. If the ground is uneven or the load unparallel to the vehicle, the equalizing bar will compensate for any differences which may have occurred up to this point. Once both loading arms come in contact with the equalizing bar the power is transferred automatically to energize the two actuator motors which will rotate the arm assembly until they comes to rest horizontally on the main frame of the loader. When the unloading button is pressed the reverse action is accomplished automatically until the object is resting on the ground. Disconnect the clips and the object is free.

Tying down the Cargo is accomplished from the ground on the side of the vehicle the object was loaded from. Two lines fastened to the far side of the main frame of the loader are passed over the top of the object as it is midway up the side if the vehicle when loading. As the object continues loading and then is finally resting on top of the vehicle, these lines are then hanging down along the side of the vehicle. Fasten the lines to the main frame eye bolts of the loader on low vehicles. On high vehicles such as campers or motor homes, two eye bolts are fastened to the side of the vehicle for the tying off of the two safety lines. There is no need to climb on top of the vehicle to secure the object.

Tying down the Cargo is accomplished from the ground on the side of the vehicle the object was loaded from. Two lines fastened to the end of the Loading Arms of the loader are passed over the top of the object as it is midway up the side of the vehicle when loading. As the object continues loading and then is finally resting on top of the vehicle, these lines are then hanging down along the side of the vehicle. Fasten the lines to side of the loader on low vehicles. On high vehicles such as campers or motor homes, there is no need to get up on top of the vehicle to tie it down, just tie off the securing line to the side of the vehicle.

Installation

The Loader in a box supplied with an assembly manual. Most people can assemble in one day. The Loader needs a Rack to mount on to.